Garbage Disposal Repair Pasadena

First thing needs to come first here. Never stick your hand down the garbage disposal. It can be dangerous even if the device isn’t turned on. It would be awful for you to have an accident and it certainly would not be worth the trouble.

The Garbage Disposal Won’t Turn on

If your problem is that the garbage disposal doesn’t turn on, then you should begin your troubleshooting by making sure that the garbage disposal hasn’t come unplugged inadvertently. It might seem kind of silly, but that would be the easiest possible fix and you don’t want to neglect that possibility.

Next, you should look underneath the garbage disposal. You will find a button underneath there that serves as a reset button. Make sure that the button is pushed in because if it’s out then that means it has been reset.

Next, go to your circuit breaker and make sure that the breaker that controls the garbage disposal is not tripped. If none of these ideas serve to fix the problem, then you either have a bad garbage disposal or the switch on the garbage disposal is faulty. Look for the switch that runs the garbage disposal. It may be right on the wall or underneath the sink. You should turn off the circuit breaker and then put a new switch on. Then, try to see if the garbage disposal runs now. If it does run now, that means the problem was the switch. If it doesn’t fix the problem, then you need to get a new garbage disposal or get professional garbage disposal repair Pasadena.

The Flywheel Is Stuck

If you notice that the garbage disposal fails to power on, but seems to try and makes a noise when you try to turn it on, that indicates a problem with the flywheel. When the flywheel is stuck, the button that resets the garbage disposal will automatically stop the device from running. This means that there is something that is stuck in the flywheel that needs to be removed. What you will first need to do before you do anything else is turn off the circuit to the device so that the power to the garbage disposal is off.

Next, you should keep your hands out of the hopper of the garbage disposal. You will need to use a wrench to put into the hole underneath the garbage disposal. You put the wrench into this flywheel hole and turn it so that you can get rid of the obstruction that is keeping the flywheel from turning. You will be able to tell right away when the flywheel can turn again because it will turn very easily. Another thing that you can try is to stick the handle of a broom down in the hopper to try to get the flywheel moving again. Now, you can push the button to reset the garbage disposal. You can turn the circuit breaker back on again. Now, allow some water to go down the drain and turn the switch on for the garbage disposal a few times rapidly. You should get the debris that was lodged in there to go down the drain. If this doesn’t work, you should consider professional garbage disposal repair Pasadena.

Garbage Disposal Is Leaking

If you are having a leak at the sink part, you should use the circuit breaker to turn off the garbage disposal’s power. What you should do is do a couple of turns on the garbage disposal until you can get it out from where it is mounted. You should tighten up the bolts that you see there. If you find that the bolts are not loose, then you might need to use some plumbers putty on the flange. You will have to loosen the bolts so that you can get at the connection and put the putty in there. Now you would tighten the bolts again and the putty should help to seal the connection between the flange and the sink much better. Now, you can just put the garbage disposal back into where you got it.

If you find that none of these solutions work for you, then it might be prudent for you to seek professional garbage disposal repair Pasadena.