Dishwasher Repair Pasadena

Basic Things to Look at

The first step that you should take is to see if your washing machine is getting the power that it needs in order to run. For example, you should check to see if the dishwasher is really plugged in. Sometimes things can accidentally come unplugged. You should also check to make sure that the cord and plug to the dishwasher have not become damaged. If they are damaged, you should consider getting a new cord for your dishwasher to replace the old one.

Try to plug something else into the outlet that you were using for the dishwasher. If the device that you just plugged in doesn’t work, then the outlet is bad and you would need to use a different socket or get that one fixed. Next, check to see if the circuit breaker has been tripped because this will prevent your dishwasher from getting power. Next, you should check to make sure that the fuse to the dishwasher hasn’t been blown. If it has been blown, you will need to replace the fuse which is very easy to do. If none of these solves your issue, you may want to consider dishwasher repair Pasadena.

Looking Further

The next thing that you should do is test the switch that controls your dishwasher to make sure that it works. You can use a voltage tester to do this test. You can remove the cover or the switch and place the probes of the tester in each side to check this out. If the tester doesn’t light up, then the switch that controls the dishwasher needs to be replaced. The next thing that you should do is make sure that the latch on the dishwasher door is closing completely. The appliance is designed to remain off if the door is not closed.

To test this, you should hold the latch firmly with your fingers until it’s closed. If the washing machine works with your holding it shut like that then you will need to get a new latch or fix this one. The next thing to check is to make sure that the dishwasher is getting water. To that end, you will also want to check if the temperature of the water is sufficient. If the water heater stops working, that can affect how the dishwasher functions. You can test this by seeing if you get hot water out of any faucet in your house. Finally, you should check all of the controls to make sure that you have them all set properly. If these steps don’t work, you may need to consider getting dishwasher repair Pasadena from professionals.

How to Replace the Door Gasket

If you find that the water is leaking from your dishwasher, your door gasket is probably bad. Open up the door and look to see if the gasket shows signs of wear or cracking. If it does, you will need to put a new door gasket on because that should fix the problem. Put a new gasket on the door. You should then also check to see if the gasket fits well on the door. If you see that it doesn’t seem to fit on there very well, you might need to take a screwdriver and tighten up some of the screws that hold the door gasket on. It may take some adjustments before you get the door gasket to fit nice and snugly.

How to Fix the Door Latch

Sometimes the door latch to the dishwasher gets damaged. If the latch does not close, then the appliance is designed to stay off so that it prevents flooding. You should check to see if the latch has become loose or has come off of its proper position. If it has, you should be able to fix that with a screwdriver. You should get the latch fixed and then check to see if that has fixed the problem. Try to turn the dishwasher on after you have shut the door. If the dishwasher still doesn’t work, then you need to get a brand new latch. You can also get professional dishwasher repair Pasadena.