Freezer Repair Pasadena

There are a ton of different things that can potentially go wrong with a freezer. In this article, will have a chance to troubleshoot different freezer problems and potentially even repair some of the freezer problems that you might have.

The Freezer Isn’t Working and the Light Doesn’t Come on

The very first thing that you should look into is to be sure that the freezer is still plugged into the wall socket. This is the most common cause of a freezer not working. The device may have inadvertently come unplugged when you were moving it around or when someone accidentally bumped the freezer. If the device has come unplugged, all you would need to do is plug the freezer back in and you should be good to go. The next thing that you should look into is to see if the fuse has been blown. You should test the fuse and if it’s blown out, you would just need to replace the fuse and that would solve your problem more than likely.

Another thing to look into is to make sure that the circuit breaker hasn’t been accidentally tripped. This would cause the freezer to not get the power that it needs to run. If the circuit breaker has been tripped, you would just need to switch it back on and you should have it fixed.

Next, you should use a tester to see if the socket that the freezer is plugged into hasn’t gone bad. If it has, you would need to get that repaired by an electrician. Next, look at the power cord to the freezer and make sure that it has no tears or damage to it. If you notice that it’s damaged, then that is likely to be the problem. If you have any other problems, you should get professional freezer repair Pasadena.

Freezer Doesn’t Work, but the Light Works Fine

If your freezer’s light works, there may be a problem with the temperature that you have the device set at. Next, you should go ahead and do some cleaning on the condenser coils. Next, you should remove your freezer from the power for a few hours and then plug it back in. If it runs fine now, then your compressor is overheating. The next thing you should do is run a test on the temperature control and evaporator fan of the freezer. Next, check the defrost timer and compressor motor on the device. You may also elect to test the overload protection and compressor relay on the freezer. If this doesn’t solve the problem get freezer repair Pasadena specialists to have a look.

Freezer Gets Too Cold

 If your freezer is not getting cold enough, the first thing that you should do is have a look at the way you have the temperature set on the freezer. Some people don’t realize that the temperature controls can be bumped accidentally and can be changed. You might not have it set to a cold enough temperature to keep your food cold in the freezer.

The next thing that you should do is stop for a moment and make sure that the freezer has enough space to allow sufficient air flow within the freezer. You should also look at the vents and make sure that there is no constriction on the vents. You should also check to make sure that the temperature control is functioning correctly.

Next, take a moment to go in and clean the coils on the condenser. Also, you should check to make sure that the door seals have not become damaged. If the freezer is not sealing properly when it is closed, then the temperature will not be maintained at the level that you want it to be. You should also check to make sure that the door is closing completely when you shut it. You should also take a moment to check and see if the door switch is working properly. If it’s not, then that could be a problem with cooling.

You should check the timer on the defrost control as well as the defrost heater to make sure that they are working properly. You should also check the evaporator fan to make sure that it is working. Next, check for clogs and leaks in the drain tube and refrigerant. If you still can’t figure out the problem after all this, then you may need to get further assistance. You should consider getting freezer repair Pasadena from the professionals.